JRC JLR-7500 - Page 180

6-14
z Connector Assembly
(1) Prepare the cable to the following dimensions.
(2) Assemble the included components in the following order.
Clamp Ring tightening torque: 1.2 - 1.5 kgf-cm
Sealing Nut tightening torque: 1.3 - 1.8 kgf-cm
10mm
3mm
Seal
Gasket
O-Ring
Housing
Lock Nut
Sealing Nut
Clamp Ring
Gasket installation
direction