JRC JLR-7500 - Reading the Display

2-2
z Reading the Display
The symbols and characters that appear in fixed locations on the screen are described below.
Screen Title
The title of the open screen is displayed.
Navigator numbe
r
Main display unit: Displays only the navigator number.
Sub display unit: and S followed by the subsequent
numbers are displayed.
Time Display
Time is displayed in order of hours: minutes: seconds.
In 12 hour display mode, " " or " " are displayed.
If a time difference is set, "
L" is displayed. Otherwise, UTC:"U" is
dis
p
la
y
ed.
Date Display
Geodetic System
Equipment setting mode
Displayed when the equipment setting
mode is selected
Alarm Information
This is displayed when alarm information
messages have been updated.
Beacon Information Reception Displa
y
This is displayed when meteorological information has been
received from a beacon. A buzzer is generated when this
is displayed.
Alarm Displa
y
Displayed when the number exceeds the configured value.
Position fixing mode
No position fixing: 2D position fixing: 3D position fixing:
Position correction mode
GPS position fixing: Beacon DGPS position fixing: SBAS position fixing:
Waypoint update
The method for updating the waypoint for the current navigation is displayed.
Automatic update: Manual update:
Preset alarm
If a preset alarm occurs, alarm information
is displayed. For ship speed, trip, depth,
and temperature alarms, the
corresponding preset units are displayed.
Arrival:
Anchor:
XTD:
Boundary:
Ship speed:
Trip:
Depth:
Temperature:
Magnetic correction
Displayed when magnetic correction is set
LAN sharing
Displayed when the active route sharing mode through LAN is selected
Sharing 1 Sharing 2 Sharing3 Sharing4
Demo mode
Displayed when the demo mode is active
RAIM
Displays the preset accuracy level
In operation:
RAIM OFF :
No faulty satellite:
RAIM impossible:
Presence of faulty
satellite: