4-38
6. The cursor will move to the "COPY", so press .
If there is insufficient continuous free space at the copy destination, the following will be
displayed. Press to select the copy method, and press
.
The following is an overview of the display.
ALL OVER WRITE :Overwrites from selected copy destination.
Waypoints which are used by routes cannot be overwritten.
In this case, "ALL OVER WRITE" is not displayed.
TO EMPTY AREA : Copying is performed to a different empty area.
When there are no empty area in list, "TO EMPTY AREA" is not
displayed.
CANCEL : Copying is cancelled.
· When multiple contiguous numbers are selected as the copy source, selections which
span registration group boundaries (10000 and 10512) cannot be made.
Ex.) 9999 - 10001 and 10511 - 10513 cannot be selected.
Start of Copy Destination
Memo
To Next Page
Loading...
