4-55
MANUAL: Switching to the next waypoint is performed manually.
is
displayed in the status bar.
When the arrival circle is reached, the arrival alarm sound configured
in the alarm settings will be sounded, and the following will be
displayed. Press
to stop the alarm and update the waypoint.
(2) DIRECTION: You can set whether to navigate in the order of the waypoints, or to
navigate starting from the final waypoint.
ORDER: Navigation is performed in the order of the waypoints.
REVERSE: Navigation is performed starting with the final waypoint.
(3) NAVIGATION: Starts and stops navigation.
START: Navigation is started.
END: Navigation is stopped.
(1) Setting the LEG CHANGE Method
Press "LEG CHANGE", press to select the LEG change method, and then
press
.
(2) Setting the DIRECTION
Press "DIRECTION", press to select the direction, and then press .
4. Press
"NAVIGATION" to start navigation.
To Next Page
Loading...
