JUKI FX-1 - YB-Axis Magnescale Affixing Position (FX-1 R); YA-Axis Magnescale Affixing Position (FX-1 R)

FX-1/FX-1R Maintenance Manual
1-8-2. YB-axis magnescale affixing position (FX-1R)
(1) Affix the magnescale with the 4mm-thick block gauge made tightly in contact with the side
surface of the Y-linear guide.
Block gauge
Figure 1-8-2-1
1-8-3. YA-axis magnescale affixing position (FX-1R)
(1) Affix the magnescale on the YA-scale base evenly.
Figure 1-8-3-1
1-13
Rev. 2.00