Warning
For the safe operation of machinery!!
All personnel engaged in the operation of the chip placer and its accessories (here after
referred to as "machines") including the operators, service and maintenance personnel are
required to read through this safety warning to make familiar with its handling to prevent
accidents and injuries.
This "Warning: For the safe operation of machinery" instructions contain aspects that are
not included in the instruction sheet attached to the product.
The following symbols are used throughout this instructions and on the product for the better
understanding of various warning labels. Please make yourself familiar with the contents
and act accordingly.
1) Danger levels
Dangerous
Parts of machinery the negligence or mishandling of which
committed during the operation, maintenance or other services on
such parts will lead to severe accidents involving serious personal
injuries or even death.
Warning
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation, maintenance
or other services on such parts may cause potential danger to the
personnel which may lead to injuries and/or even death.
Attention
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation, maintenance
or other services on such parts may cause the medium-to-light level
of hazards to the personnel involved.
2) Warning, prohibition and directive marks
Warning, prohibition and directives are marked with the following symbols:
Warning marks
Your hands or clothes may get
caught by the machines.
Beware of moving parts.
Contacts with them may cause
injuries.
High voltage!!
Beware of electric shocks.
Beware of hot parts.
Contacts with them may cause a
burn.
Beware of movable parts.
Contacts with them may cause
injuries.
If any load is imposed or you
lay your hand on the machine,
it may be damaged.
Directive symbols
It symbolizes a contact to a
grounding wire.
It indicates the direction of turn.
Matters of Caution Regarding Safety
I