EasyManuals Logo

Juniper SRX300 Hardware Guide

Juniper SRX300
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Related
Documentation
SRX300 Services Gateway General Safety Guidelines and Warnings on page 91
SRX300 Services Gateway Safety Requirements, Warnings, and Guidelines on page 92
Restricted Access Area Warning on page 92
Qualified Personnel Warning on page 94
Preventing Electrostatic Discharge Damage to the SRX300 Services Gateway on
page 95
SRX300 Services Gateway General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the services gateway from
damage. The list of guidelines might not address all potentially hazardous situations in
your working environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in these topics. Ensure that only
authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip on them.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this guide. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the services gateway chassis or onto any services gateway
component. Such an action could cause electrical shock or damage the services
gateway.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Related
Documentation
SRX300 Services Gateway General Safety Guidelines and Warnings on page 91
SRX300 Services Gateway Safety Requirements, Warnings, and Guidelines on page 92
Restricted Access Area Warning on page 92
Qualified Personnel Warning on page 94
91Copyright © 2016, Juniper Networks, Inc.
Chapter 20: General Safety Guidelines and Warnings

Table of Contents

Other manuals for Juniper SRX300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX300 and is the answer not in the manual?

Juniper SRX300 Specifications

General IconGeneral
USB 2.0 ports quantity1
Connectivity technologyWired
SFP module slots quantity2
Ethernet LAN (RJ-45) ports6
Internal memory4000 MB
Flash memory8000 MB
Storage media typeFlash
Power consumption (typical)15.4 W
Noise level0 dB
Heat dissipation85 BTU/h
Concurrent connections64000
Mean time between failures (MTBF)389820 h
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Routing protocolsBGP, CLNS, IS-IS, OSPF, RIP-1, RIP-2
Number of users50 user(s)
Quality of Service (QoS) supportYes
Firewall throughput1000 Mbit/s
Mobile VPN IPSec250
IPS/IDS throughput100 Mbit/s
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Weight1980 g
Dimensions (WxDxH)320.8 x 34.7 x 191 mm

Related product manuals