Juniper SRX300 - Chapter 1 System Overview; System Overview; SRX300 Services Gateway Description; SRX300 Services Gateway CLI and J-Web Access

CHAPTER 1
System Overview
•
SRX300 Services Gateway Description on page 3
•
SRX300 Services Gateway CLI and J-Web Access on page 3
SRX300 Services Gateway Description
The SRX300 Services Gateway consolidates networking and security capabilities for
small retail offices. The services gateway provides cost-effective, scalable integration
of routing, security, and switching in a single device. The SRX300 Services Gateway
provides firewall support with key features such as IP security (IPsec) VPN and Unified
Threat Management (UTM).
With a desktop form-factor chassis, the SRX300 Services Gateway has eight 1 G Ethernet
ports, two 1 G SFP ports, 4 GB of DRAM memory, and 8 GB of flash memory.
The SRX300 Services Gateway runs the Junos operating system (Junos OS) and supports
the following features:
•
Firewall support with key features such as IPsec and VPN
•
Intrusion Detection and Prevention (IDP)
•
High availability
•
QoS
•
MPLS
Related
Documentation
SRX300 Services Gateway Chassis Overview on page 5•
• Understanding the SRX300 Services Gateway Front Panel on page 5
• Understanding the SRX300 Services Gateway Back Panel on page 7
SRX300 Services Gateway CLI and J-Web Access
The SRX300 Services Gateway runs the Junos operating system (Junos OS). You can
use two user interfaces to monitor, configure, troubleshoot, and manage the services
gateway:
3Copyright © 2016, Juniper Networks, Inc.