Figure 11: Connecting the Grounding Cable to the SRX300 Services
Gateway
5. Secure the grounding cable lug to the grounding point, first with the washer, then with
the screw.
6. Dress the grounding cable and verify that it does not touch or block access to the
services gateway components and that it does not drape where people could trip on
it.
NOTE: The device should be permanently connected to ground during
operation.
Related
Documentation
• Required Tools and Parts for Grounding the SRX300 Services Gateway on page 49
• SRX300 Services Gateway Grounding Specifications on page 49
51Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Connecting the SRX300 Services Gateway to Ground
To Next Page
Loading...
