Juniper SRX300 - Connecting the SRX300 Services Gateway to the Building Structure

• Preparing the SRX300 Services Gateway for Wall-Mount Installation on page 40
Connecting the SRX300 Services Gateway to the Building Structure
Always secure the rack in which you are installing the services gateway to the structure
of the building. If your geographical area is subject to earthquakes, bolt the rack to the
floor. For maximum stability, also secure the rack to ceiling brackets.
Related
Documentation
• Preparing the SRX300 Services Gateway for Rack-Mount Installation on page 39
• Installing the SRX300 Services Gateway in a Rack on page 43
41Copyright © 2016, Juniper Networks, Inc.
Chapter 11: Installing the Rack Mounting Hardware