CHAPTER 3
Power System Description
•
Understanding the SRX300 Services Gateway Power Supply on page 9
Understanding the SRX300 Services Gateway Power Supply
The power supply for the SRX300 Services Gateway is external. You must use the AC to
DC, 60 W power supply adapter provided by Juniper Networks to provide power to the
services gateway. The adapter provides an output of 12 VDC, 5 A.
Related
Documentation
• Connecting the SRX300 Services Gateway to the Power Supply on page 55
• Powering On the SRX300 Services Gateway on page 56
• Powering Off the SRX300 Services Gateway on page 56
9Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
