■ Chassis (if available)
■
Compressor unit
■ Pressure-bearing components (e.g., valves, vessels, pipelines)
Remodeling or modifications can have the result that the interaction of the individual modules ac‐
cording to regulations is no longer ensured. Thus, the prerequisites required for approval by the
authorities may no longer be given.
The concerned directives and regulations can be:
■ Machinery directive
■ Pressure vessel directive
■ EMC directive
■ Directive for environmental noise
In machines requiring a national road traffic permit, remodeling or modifications may adversely af‐
fect their approval for road traffic.
■ Exhaust emission limits may not be met.
■ The prerequisites for approval are no longer given.
Remodeling or modifications restrict the service work that can be performed for you. For example:
■ Warranty (if directly and originally affected by the remodeling or modification)
■ Reduced replacement part supply (scope, delivery times)
3.13 Environmental protection
The operation of this machine may cause dangers for the environment.
➤ Do not allow operating materials to escape into the environment or into the sewage system.
➤ Store and dispose of operating materials and replaced parts in accordance with local environ‐
mental protection regulations.
➤ Observe relevant regulations.
This applies particularly to parts contaminated with fuel, oil, coolants and acids.
3 Safety and Responsibility
3.13 Environmental protection
No.: 9_6999 23 USE
Operator Manual Screw Compressor
M100
41
To Next Page
