KAESER M100 User Manual

Adding lubricating oil
1.
Open the shut-off valve.
2. Close the access door.
Setting the oil flow
The amount of oil the compressed air should contain depends on the application and must be de‐
termined by the user. It depends on the nature of the air consumers and the supply hoses.
The metering valve controls the flow of oil into the air.
■ Clockwise adjustment reduces the oil flow.
■ Counter-clockwise adjustmen: increases the oil flow.
1. Set the required oil flow.
2. Close the access door.
Further information Fill the tool lubricator with suitable oil (see chapter 10.8.1)
Shutting off lubricating oil
1. Close the shut-off valve.
2. Close the access door.
8.5 Option ba
Using the low-temperature equipment
➤ Ascertain which low temperature equipment is fitted to the machine.
8.5.1 Option bb
Pre-warms the engine cooling water
➤ Start the engine coolant pre-heating as described in chapter 7.4.2.
8 Operation
8.5 Using the low-temperature equipment
No.: 9_6999 23 USE
Operator Manual Screw Compressor
M100
87

KAESER M100 Specifications

General

Maximum Pressure	10 bar
Sound Power Level	99 dB(A)
Fuel Tank Capacity	150 liters
Working Pressure	7 to 10 bar
Operating Pressure	7 to 10 bar
Engine	Diesel