KAESER M100 User Manual

Fig. 75 Towbar maintenance
1 Handle
2 Transfer cable
3 Lubricating points
4 Greasing points
Fig. 76 Maintaining the fixed height towbar
4 Greasing points
10.7.2.1 Checking the tow bar
1. Check the towbar for correct function and movement.
2.
Clean and oil all sliding and rotating bearings.
Check the height setting of the towbar
➤ Check the towbar height adjustment function.
The locking teeth on the towbar height adjustment joint are corroded and jammed and the
towbar height cannot be adjusted.
➤
If necessary, free the teeth by jerking the towbar horizontally and vertically.
➤ Clean the toothed coupling and smear with water-repellent grease.
Further information See chapter 6.4.1 for towbar height adjustment.
10 Maintenance
10.7 Chassis maintenance
150
Operator Manual Screw Compressor
M100
No.: 9_6999 23 USE
Option rb/rk/rm/rs,
rb/rl/rm/rs
Option rc/ro/rs, rd/ro/rs
Option rb/rk/rm/rs,
rb/rl/rm/rs

KAESER M100 Specifications

General

Maximum Pressure	10 bar
Sound Power Level	99 dB(A)
Fuel Tank Capacity	150 liters
Working Pressure	7 to 10 bar
Operating Pressure	7 to 10 bar
Engine	Diesel