KAESER M100 User Manual

2 Technical Data
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine (see illustration in chapter
13.1).
➤ Enter the nameplate data here as a reference:
Feature Value
Vehicle Identification No.
Permissible total weight
Permissible coupling load
Permissible axle load
Portable compressor
Part no.
Serial no.
Year of manufacture
Total weight
Lifting point load capacity
Rated engine power
Engine speed
Maximum working pressure
Tab. 3 Nameplate
2.2 Options
A list of the options fitted to your machine helps to relate the information in this service manual.
Options fitted to the machine are listed on the options label (as code letters).
The nameplate can be found:
■
On the outside of the machine
■ On the front of the machine (see chapter 13.1)
The following table lists all possible options.
Only the codes for those options fitted on the machine appear on the nameplate.
2 Technical Data
2.1 Nameplate
4
Operator Manual Screw Compressor
M100
No.: 9_6999 23 USE

KAESER M100 Specifications

General

Maximum Pressure	10 bar
Sound Power Level	99 dB(A)
Fuel Tank Capacity	150 liters
Working Pressure	7 to 10 bar
Operating Pressure	7 to 10 bar
Engine	Diesel