KAESER M100 - Monitoring Fuel Level in the Fuel Tank; Operating the Tool Lubricator; Fig. 41 Setting the Tool Lubricator

2. Switch off the «» controller.
3.
Close the door.
Secure both doors with locks as necessary.
8.3 Monitoring fuel level in the fuel tank
The fuel tank is fitted with a fuel level monitor.
When the fuel level drops to a certain point, the
fuel level warning lamp (yellow) on the instrument
panel lights.
➤ Check the indicator lamp fuel level .
Indicator lights.
➤
Fill the fuel tank immediately.
Further information Further information on the fuel tank monitoring can be found in chapter 4.6.
8.4 Option ea, ec
Operating the tool lubricator
Precondition The machine is switched off.
Tool lubricator is filled with oil
Fig. 41 Setting the tool lubricator
1 Shut-off valve
I – open
0 – closed
2 Metering knob
➤ Open the right-hand access door.
8 Operation
8.3 Monitoring fuel level in the fuel tank
86
Operator Manual Screw Compressor
M100 No.: 9_6999 23 USE