EasyManua.ls Logo

KEB COMBIVERT F6 Series

KEB COMBIVERT F6 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.1.4 Electrical operating conditions
3.1.4.1 Deviceclassication
Requirement Standard Class Descriptions
Overvoltage category
EN 61800-5-1
III
EN 60664-1
Pollution degree EN 60664-1 2
Non-conductive pollution, occasional conden-
sation when PDS is out of service.
Table 5: Device classication
3.1.4.2 Electromagnetic compatibility
Fordeviceswithoutaninternallter,anexternallterisrequiredtocomplywiththe
following limits.
EMC emitted interference Standard Class Descriptions
Conducted emissions
EN 61800-3 C2
Radiated emissions EN 61800-3 C2
Immunity Standard Level Descriptions
Static discharges EN 61000-4-2
8 kV
4 kV
AD (air discharge)
CD (contact discharge)
Burst - Ports for process
measurement control lines
and signal interfaces
EN 61000-4-4 2 kV
Burst - Power ports EN 61000-4-4 4 kV
Surge -
Power ports
EN 61000-4-5
1 kV
2 kV
Phase-phase
Phase-ground
Immunity to conducted distur-
bances, induced by radio-fre-
quencyelds
EN 61000-4-6 10 V 0.15...80 MHz
Electromagneticelds EN 61000-4-3
10 V/m
3 V/m
1 V/m
80 MHz...1 GHz
1.4...2 GHz
2...2.7 GHz
Voltageuctuations/
voltage dips
EN 61000-2-1
EN 61000-4-34
-15%...+10%
90%
Frequency changes EN 61000-2-4 ≤2%
Voltage deviations EN 61000-2-4 ±10%
Voltage unbalance EN 61000-2-4 ≤3%
Table 6: Electromagnetic compatibility
30
TECHNICAL DATA

Table of Contents

Related product manuals