Keba ServoOne junior - Page 323

ID Index Name Unit Description
217 0 MPRO_BRK_
LastTorqFact
% Motorbrake:factorforapplicationoflasttorque
218 0 MPRO_BRK_StartTorq Nm Motorbrake:initialtorque(constant)
219 0 MPRO_BRK_LastTorq Nm Motorbrake:torquesampledatlastclosingtime
220 0 MPRO_BRK_Lock  lockbrake
Table 9.16: “Motor brake details” parameters (continue)
NOTE
l Pleasecheckthesettingsofthestoprampsifuseofaholding
brakeisspecified(seeSection"Stopramps"onpage251).
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
323
9 Inputs/Outputs settings