EasyManuals Logo

Keba ServoOne junior Device Help

Keba ServoOne junior
493 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #404 background imageLoading...
Page #404 background image
11.6.25Error24:Encoderchannel3,initializationerror
11.6.25.1Error24-1(emergencycode7307h)
Cause: Channel 3 Initialization: error, module identification failed
Suggested steps:
Please look up, if there's placed the right hardware module in the slot of X8
IdentificationoftheX8
module
l ThisisprobablyahardwareproblemoftheX8
module!
l PleasecheckifthecorrectX8moduleis
installed.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Iftheerroroccursagain(after24Vreset),
pleasecontactyourserviceprovider.
11.6.25.2Error24-2(emergencycode7307h)
Cause: Channel 3 Initialization: common error from encoder option module
Suggested steps:
Please look at Log entry window for error code information
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
404
11 Alarms & warnings
11.6.25.3Error24-3(emergencycode7307h)
Cause: Channel 3 Initialization, SSI: error, encoder monitoring
Suggested steps:
Please connect the encoder correctly.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.25.4Error24-4(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: error, no EnDat 2.1 encoder (May be,
it's an SSI encoder!?)
Suggested steps:
No further information available. Please contact your service provider.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.

Table of Contents

Other manuals for Keba ServoOne junior

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keba ServoOne junior and is the answer not in the manual?

Keba ServoOne junior Specifications

General IconGeneral
BrandKeba
ModelServoOne junior
CategoryController
LanguageEnglish

Related product manuals