EasyManuals Logo

Keba ServoOne junior Device Help

Keba ServoOne junior
493 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #405 background imageLoading...
Page #405 background image
11.6.25.5Error24-5(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: error, 'Lines' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.25.6Error24-6(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: error, 'MultiTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
405
11 Alarms & warnings
11.6.25.7Error24-7(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: error, 'SingleTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.25.8Error24-8(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: CRC error, position data from encoder
Suggested steps:
The transmission is probably disturbed. Please check the wiring to the encoder.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.

Table of Contents

Other manuals for Keba ServoOne junior

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keba ServoOne junior and is the answer not in the manual?

Keba ServoOne junior Specifications

General IconGeneral
BrandKeba
ModelServoOne junior
CategoryController
LanguageEnglish

Related product manuals