Keba ServoOne junior - Error 41: Fast Discharge Monitoring Error (DC-Link)

11.6.38.9Error40-8(emergencycode7300h)
Cause: Tech-Option initialisation error
Suggested steps:
Error in TwinSync mapping configuration
Thisissueisprobably
causedbyanunsuitable
parametersetting.
l Saveyourparametersetforalaterrestore.
l See'historyofparameterchanges'andundo
thelatestchanges.
l Pleasecheckyourparametersetfor
implausiblesettings.
l Pleasesetdevicetofactorysetting,restart,and
seeiftheerroroccursagain.
l Whenreportingthiserrortoyourservice
partner,pleaseincludeyourdevice's
parametersetting.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
434
11 Alarms & warnings
11.6.39Error41:Fastdischargemonitoringerror(dc-
link)
11.6.39.1Error41-0(emergencycode7300h)
Cause: Maximumperiodforfastdischargeexceeded(35s)
Suggested steps:
Thisissueisprobably
causedbyanunsuitable
parametersetting.
l Saveyourparametersetforalaterrestore.
l See'historyofparameterchanges'andundo
thelatestchanges.
l Pleasecheckyourparametersetfor
implausiblesettings.
l Pleasesetdevicetofactorysetting,restart,and
seeiftheerroroccursagain.
l Whenreportingthiserrortoyourservice
partner,pleaseincludeyourdevice's
parametersetting.