Keba ServoOne junior - Error List; Error 0: Unknown Error; Error 1: Runtime Error

11.6Errorlist
11.6.1Error0:Unknownerror
NoError. Anerrormessagewiththeerrornumber0usually
doesnotoccur.(inverseerrornumber)
11.6.2Error1:Runtimeerror
11.6.2.1Error1-0(emergencycode6010h)
Cause: Unknown runtime error
Suggested steps:
See exception message
Thisisprobablyasoftware
issue.
l Pleasetrytoswitchtoadifferentversionof
devicefirmware.
l Saveyourdatasetandresettheaxismoduleto
factorysetting.Seeiftheerrorpersists,orifit
comeswithactivatingacertainfeature.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
342
11 Alarms & warnings
11.6.2.2Error1-1(emergencycode6010h)
Cause: Errorwhileinstallingadynamicmodule
Suggested steps:
Thisisprobablyasoftware
issue.
l Pleasetrytoswitchtoadifferentversionof
devicefirmware.
l Saveyourdatasetandresettheaxismoduleto
factorysetting.Seeiftheerrorpersists,orifit
comeswithactivatingacertainfeature.
11.6.2.3Error1-2(emergencycode6010h)
Cause: Errorwhileflashinitialisation/flashaccess
Suggested steps:
Thisisprobablyasoftware
issue.
l Pleasetrytoswitchtoadifferentversionof
devicefirmware.
l Saveyourdatasetandresettheaxismoduleto
factorysetting.Seeiftheerrorpersists,orifit
comeswithactivatingacertainfeature.