Keithley 2750 User Manual

CARD menu 1-19, 2-28
tree 2-30
Case sensitivity 10-13
Channel assignments 2-6, 7-3
Channel average 5-16
Channel closing and opening 2-25
Channel list parameter () 3-7
Channel setup 7-26
Channel setup considerations 7-12
Filter 7-12
Rel 7-12
channel, monitor 7-18
CLOSE
MULTI 2-10
SINGLE 2-10
CLOSE key 2-10, 2-18
Color codes
Thermocouple wires 3-31
Command codes G-10
Command execution rules 10-16
Command path rules 10-16
commands
Address G-9
Addressed multiline G-9
autozero and LSYNC 3-6
Bus G-6
Common G-10
SCPI G-10
Unaddress G-9
Uniline G-8
Universal multiline G-8
Commands and command parameters 10-11
Common Commands 12-1
*OPC 12-3
*OPC? 12-4
Condition register commands 11-18
Condition registers 11-18
Connector and adapter kits for switching
modules 1-4
Contact information 1-2
Continuity connections 3-42
Continuity testing 3-41
Connections 3-41
Front panel input 3-41
Model 7700 switching module 3-41
procedure 3-42
control source
External trigger 7-8
Immediate 7-8
Timer 7-8
Control sources 7-7
Crest factor 3-12
Limitations 3-12
Current measurements (DCI and ACI) 3-14
AMPS fuse replacement (front panel
AMPS input) 3-16
Amps measurement procedure 3-15
Connections 3-14
Front panel inputs 3-14
Model 7700 switching module 3-15
D
Data lines G-4
dB 5-21
commands 5-21
configuration 5-21
Programming examples 5-22
Remote programming 5-21
Scanning 5-21
DCI and ACI connections using front panel
inputs 3-14
DCI and ACI connections using Model 7700
switching module 3-15
DCV and ACV connections using front panel
inputs 3-9
DCV and ACV connections using Model 7700
switching module 3-10
default and user setups
programming example 1-25
remote programming 1-24
Default settings 1-21
default setups
commands 1-24
Defaults and user setups 1-19
Delay (auto or manual) 8-3
Delays 7-8
Auto 7-9
Manual 7-8, 7-9
Ratio/Chan Average 7-9
Device action 7-9, 8-5
Digital I/O 1-12, 8-6
Digits 4-5
commands 4-6
programming examples 4-7
Remote programming 4-6
Scanning 4-5
Setting 4-7
Display 1-17
commands 1-17
programming example 1-18
remote programming 1-17
Display annunciators 1-11
2750-900-01.book Page 2 Wednesday, August 3, 2011 7:56 AM

Keithley 2750 Specifications

General

Interface	GPIB, RS-232, Ethernet
Switching Speed	Up to 500 channels/second
Maximum Voltage	300V
Operating Temperature	0°C to 50°C
Measurement Functions	DCV, ACV, DCI, ACI, 2-wire Resistance, 4-wire Resistance, Frequency, Temperature
Resolution	6.5 digits
Current	1A
Maximum Current	1A