To Next Page

To Previous Page

10-8 Sweep Operation 2400 Series SourceMeter

User’s Manual

Saving source memory setups

Perform the following steps to save source memory setups:

1. Conﬁgure the SourceMeter for the desired source, measure, and/or math expres-

sion operation.

2. Press MENU to display the MAIN MENU:

• Select SAVESETUP.

• Select SOURCE MEMORY.

• Select SAVE.

• Use the  and  keys, and the cursor keys to display the desired memory loca-

tion, and press ENTER.

• Use the EXIT key to back out of the menu structure.

3. Conﬁgure the SourceMeter for the next point in the sweep, and repeat Step 2 to

save that setup in the next memory location.

4. Repeat Step 3 for all points in the sweep.

Restoring source memory setups

In addition to automatically sweeping through source memory locations (see “Conﬁguring

and running a sweep” later in this section), you can also recall them individually as

follows:

1. Press MENU to display the MAIN MENU.

2. Select SAVESETUP, then press ENTER.

3. Choose SOURCE MEMORY, then press ENTER.

4. Select RESTORE, then press ENTER.

5. Select the source memory location to restore (1-100), then press ENTER.

Saving multiple source memory sweeps

If desired, you can save multiple source memory sweeps in the 100 memory locations. For

example, you could save setups in locations 1 through 4 for one sweep, and other setups in

any other range of memory locations such as locations 50 through 58. To select which

sweep to execute, simply select two settings: (1) the sweep start location, and (2) the num-

ber of sweep points. (See “Performing a source memory sweep” later in this section.)

Saved source memory conﬁgurations

Table 10-2 summarizes the conﬁgurations that are saved at each source memory location

along with the equivalent remote command. See Section 18 for more details on these

remote commands. The SCPI command reference tables, Table 18-1 through Table 18-11,

also list source memory parameters.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keithley SourceMeter 2420 User Manual

Other manuals for Keithley SourceMeter 2420