18-42 SCPI Command Reference 2400 Series SourceMeter
®
User’s Manual
FAIL:SMLocation <NRf> | NEXT
PASS:SMLocation <NRf> | NEXT
:CALCulate2:CLIMits:FAIL:SMLocation <NRf> | NEXT Specify “fail” source memory location
:CALCulate2:CLIMits:PASS:SMLocation <NRf> | NEXT Specify “pass” source memory location
Parameters <NRf> = 1 to 100 Specify memory location point
NEXT Next memory location point in list
(present location + 1)
Query :SMLocation? Query “pass” or “fail” source memory
location
Description While using a Source Memory Sweep when performing limit tests, the
sweep can branch to a specified memory location point or proceed to the
next memory location in the list.
When a memory location is specified with PASS, the sweep will branch
to that memory location if the test is successful (PASS condition). If not
successful (FAIL condition), the sweep proceeds to the next memory
location in the list. With NEXT selected (the default), the sweep pro-
ceeds to the next memory location (present location + 1) in the list
regardless of the outcome of the test (PASS or FAIL condition).
When a memory location is specified with FAIL, the sweep will branch
to that location on a failure. If not (PASS condition), the sweep proceeds
to the next memory location in the list. With NEXT selected (the
default), the sweep proceeds to the next memory location (present loca-
tion +1) in the list regardless of the outcome of the test (FAIL or PASS
condition). Note that branch on FAIL is available only via remote.
See Section 10, “Source memory sweep,” for more information.
NOTE CALC2:CLIM:FAIL:SML and CALC2:CLIM:PASS:SML are mutually exclusive
and cannot be used simultaneously.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
