Getting Started 1
Introduction
E364xA User’s and Service Guide 3
The E364xA power supplies feature a combination of
programming capabilities and linear power supply
performance that makes them ideal for power systems
applications. The E364xA power supplies may be
programmed locally from the front panel or remotely over
the GPIB and RS- 232 interfaces.
The E364xA power supplies have two ranges, allowing more
voltage at a lower current or more current at a lower
voltage. The output range is selected from the front panel or
over the remote interfaces.
Operational features
• Dual output dual range
• Constant voltage (CV) or constant current (CC) operation
• Overvoltage protection (OVP)
• Five storage locations (1 to 5) for user- defined
operating states
• Automatic turn- on self- test
• Remote sense at rear panel terminals
• User calibration from the front panel or over the remote
interfaces
Front panel operations
• Easy- to- use control features
• Output (1 or 2) and output voltage range selection
• Enabling or disabling OVP
• OVP trip level setting and condition clearing
• Setting and displaying the voltage and current limit values
• Storing or recalling the operating state
• Resetting the power supply to the power- on state
• Returning the power supply to the local mode from the
remote mode
• Retrieving or scrolling error messages on the display
• Changing the display mode (V- V, I- I, or V- I display)
To Next Page
Loading...
Need help?
General
