Operation and Features 2
Overview
E364xA User’s and Service Guide 33
• The display provides the present operating status of the
power supply with annunciators and also informs you of
error codes. For example, the power supply is operating
in the CV mode in the 8 V/3 A range and controlled from
the front panel, then the CV and 8 V annunciators will
turn on. IF, however the power supply is remotely
controlled, the Rmt annunciator will also turn on, and
when the power supply is being addressed over the GPIB
interface, the Adrs annunciator will turn on. Refer to
“Display annunciators” on page 21 for more information.
• The display provides the present operating status of the
power supply with annunciators and also informs you of
the error codes.
To Next Page
Loading...
Need help?
General
