VI E364xA User’s and Service Guide
Safety and EMC Requirements
This power supply is designed to comply with the following safety and
Electromagnetic Compatibility (EMC) requirements:
• IEC61326-1:2005/EN61326-1:2006
• Canada: ICES/NMB-001: Issue 4, June 2006
• Australia/New Zealand: AS/NZS CISPR11:2004
• IEC 61010-1:2001/EN 61010-1:2001
• Canada: CAN/CSA-C22.2 No. 61010-1-04
• USA: ANSI/UL 61010-1:2004
Environmental Conditions
This instrument is designed for indoor use. The table below shows the
general environmental requirements for this instrument.
Environmental condition Requirements
Te m p e r a t u r e
Operating condition
• 0 °C to 40 °C (full rated output)
Storage condition
• –20 °C to 70 °C
Humidity
Operating condition
• 95% RH (maximum)
Altitude Up to 2000 m
Installation category II (for indoor use)
Pollution degree 2
To Next Page
Loading...
Need help?
General
