273
Keysight InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
18 Save/Recall (Setups,
Screens, Data)
Saving Setups, Screen Images, or Data / 273
Recalling Setups, Masks, or Data / 281
Recalling Default Setups / 283
Performing a Secure Erase / 284
Oscilloscope setups, reference waveforms, and mask files can be saved to internal
oscilloscope memory or to a USB storage device and recalled later. You can also
recall default or factory default setups.
Oscilloscope screen images can be saved to a USB storage device in BMP or PNG
formats.
Acquired waveform data can be saved to a USB storage device in
comma-separated value (CSV), ASCII XY, and binary (BIN) formats.
There is also a command to securely erase all the oscilloscope's non-volatile
internal memory.
Saving Setups, Screen Images, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Save.
3 In the Save Trace and Setup Menu, press Format; then, turn the Entry knob to
select the type of file you want to save:
To Next Page
Loading...
