Reference 22
Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 331
Other Options Available
Upgrading to an MSO
A license can be installed to activate the digital channels of an oscilloscope that
was not originally ordered as a mixed-signal oscilloscope (MSO). A mixed signal
oscilloscope has analog channels plus 16 time-correlated digital timing channels.
For information about upgrading your oscilloscope through licensing, contact your
local Keysight Technologies representative or see
www.keysight.com/find/3000X-Series.
Software and Firmware Updates
From time to time Keysight Technologies releases software and firmware updates
for its products. To search for firmware updates for your oscilloscope, direct your
web browser to www.keysight.com/find/3000X-Series-sw.
To view the currently installed software and firmware press [Help] > About
Oscilloscope.
Once you have downloaded a firmware update file, you can place it on a USB
storage device and load the file using File Explorer (see "File Explorer" on
page 295), or you can use the Instrument Utilities page of the oscilloscope's web
interface (see "Instrument Utilities" on page 320).
Binary Data (.bin) Format
The binary data format stores waveform data in binary format and provides data
headers that describe that data.
Because the data is in binary format, the size of the file is approximately 5 times
smaller than the ASCII XY format.
Table 5 Calibration Option
Option Order
A6J ANSI Z540 Compliant Calibration