MIL-STD-1553/ARINC 429 Triggering and Serial Decode 27
Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 413
Interpreting ARINC 429 Lister Data
In addition to the standard Time column, the ARINC 429 Lister contains these
columns:
• Label — the 5-bit label value in octal format.
• SDI — the bit values (if included in the word decode format).
• Data — the data value in binary or hex, depending on the base setting.
• SSM — the bit values (if included in the word decode format).
• Errors — highlighted in red. Errors can be Parity, Word, or Gap.
Aliased data is highlighted in pink. When this happens, decrease the horizontal
time/div setting and run again.
Searching for ARINC 429 Data in the Lister
The oscilloscope's search capability lets you search for (and mark) certain types of
ARINC 429 data in the Lister. You can use the [Navigate] key and controls to
navigate through the marked rows.
1 With ARINC 429 selected as the serial decode mode, press [Search].
To Next Page
Loading...
Need help?
General
