Math Waveforms 4
Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 99
Chart Logic Bus State
The Chart Logic Bus State function (available with the advanced math
measurements license) displays bus data values, sampled on a clock signal's
edge, as an analog waveform (like a D/A conversion).
Use the Clock softkey to select the clock signal.
Use the Slope softkey to select the edge of the clock signal to be used.
Use the More Chart softkey to open a submenu for specifying the analog value
equivalent of each bus value increment, the analog equivalent of a zero bus value,
and the type of values the charted bus data represents (volts, amps, etc.).
Use the Units/Code softkey to specify the analog value equivalent of each
increment in the bus data value.
Figure 19 Example of Chart Logic Bus State
To Next Page
Loading...
Need help?
General
