328 Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide
22 Reference
Probes and Accessories
For a list of the probes and accessories that are compatible with the 3000 X-Series
oscilloscopes, see the data sheet at: www.keysight.com/find/3000X-Series
AutoProbe
Interface
Most Keysight single-ended active, differential, and current probes are compatible
with the AutoProbe interface. Active probes that do not have their own external
power supply require substantial power from the AutoProbe interface.
If too much current is drawn from the AutoProbe interface, an error message will
be displayed, indicating that you must momentarily disconnect all probes to reset
the AutoProbe interface, then connect only the supported quantity of active
probes.
See Also For more information on probes and accessories, see www.keysight.com for:
• Probes and Accessories Selection Guide (5989-6162EN)
• InfiniiVision Oscilloscope Probes and Accessories Selection Guide Data Sheet
(5968-8153EN)
• For compatibility information, manuals, application notes, data sheets,
selection guides, SPICE models, and more for oscilloscope probes, see the
Probe Resource Center at: www.keysight.com/find/PRC
Loading Licenses and Displaying License Information
License files are loaded from a USB storage device using the File Explorer (see
"File Explorer" on page 295).
License information is displayed with other oscilloscope information (see "To
display oscilloscope information" on page 305).
For more information about the licenses and other oscilloscope options available,
see:
• "Licensed Options Available" on page 329
• "Other Options Available" on page 331
• "Upgrading to an MSO" on page 331
To Next Page
Loading...
Need help?
General
