E4990A Help
178
End Response
Specify ending point for response value on the
limit line.
The range in which stimulus values can be specified is from
-500 G to +500 G. When a value outside the range is entered, a
suitable value within the range is specified. Once the stimulus value
is specified, changing the sweep range of the E4990A does not affect
the stimulus value.
The range in which response values can be specified is
from -500 M to +500 M. When a value outside this range is entered,
a suitable value within the range is specified. After the response
value is specified, changing formats results in changing the units but
not the value.
You can define a limit line that is able to freely overlap the
stimulus range of another limit line.
Defining one limit line that has the same type as a second limit
line whose stimulus range overlaps with tge first one results in
To Next Page
Loading...
