Keysight E4990A - Page 418

E4990A Help
408
Marker Fctn > Marker > Zoom
COM Command Syntax (Internal Control Only)
SCPI.CALCULATE(Ch).SELECTED.MARKER(Mk).SET
:CALC<Ch>:MARK<Mk>:X
Type
Command/Query
Syntax
:CALCulate<Ch>[:SELected]:MARKer<Mk>:X[:DATA] <Value>
:CALCulate<Ch>[:SELected]:MARKer<Mk>:X[:DATA]?
Description
This command sets/gets the stimulus value for marker 1 to 9 (Mk) and
reference marker (Mk:10).
Variable
Parameter Value
Description Marker X-axis position value
Data Type Numeric type (Real)
Range -
Preset Value 20
Unit Depending on the stimulus parameter
Resolution -
Query Response
{numeric}<newline><^END>
Examples
Dim Var as Double
Ana.WriteString ":CALC1:MARK1:X ON", True
Ana.WriteString ":CALC1:MARK1:X?", True
Var=Ana.ReadNumber
Related Commands
:CALC:MARK:Y
Equivalent Softkey
Marker > Marker 1 to Marker 9, Reference Marker