Keysight E4990A - Page 421

Programming
411
Type
Query
Syntax
:CALCulate<Ch>[:SELected]:MARKer<Mk>:Y?
Description
This command gets the marker y-axis value.
Query Response
{numeric1 (primary)}, {numeric2 (secondary)}<newline><^END>
The secondary value is available when the format is 2 dimension such as
R-X.
Examples
Dim Var as Variant
Var= STIM
Ana.WriteString ":CALC1:MARK1:Y?", True
Var=Ana.ReadList
Related Commands
:CALC:MARK:X
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.CALCULATE(Ch).SELECTED.MARKER(Mk).Y
:CALC<Ch>:MARK:ZAP
Type
Command/Query
Syntax
:CALCulate<Ch>[:SELected]:MARKer:ZAPerture <Value>
:CALCulate<Ch>[:SELected]:MARKer:ZAPerture?
Description
This command sets/gets the marker zooming aperture.
Variable
Parameter Value
Description Marker zooming aperture
Data Type Numeric type (Real)
Range 10m ~ 100