Keysight E4990A - Page 43

Quick Start
33
pointer vertically with the left mouse button pressed, and then releasing
the button at the desired location.
Marker Indicators
Indicates the positions of markers on the stimulus axis.
Active marker indicator
Non-active marker indicator
You can also move a marker to the desired position by placing the mouse
pointer on the marker indicator or position of the marker itself (the pointer
changes from to ), moving the indicator vertically with the left
mouse button pressed, and then releasing the button at the desired
location.
Marker Numbers
Displayed marker number is listed. For the active marker (the one for
which setup and analysis are being performed), > is displayed at the left of
the marker number. For the reference marker, is displayed instead of
the marker number.
Marker Values
The marker stimulus and response values for each marker is displayed
here. Two (or three) response values are displayed for data in Smith chart
or polar display format.
Markers
The markers used for reading values on a trace. Up to 10 markers can be
displayed for each trace.
Active marker (the one for which setup and analysis are being
performed).
Non-active marker.
Here, "n" denotes a marker number. For the reference marker, however,
nothing is displayed at the location of n. Clicking the marker or one of the
Marker Indicators makes the marker active.
Marker Statistic Parameters