E4990A Help
450
:DISP:TABL:POS
Equivalent Softkey
Marker Fctn > Marker Table
Analysis > Limit Test > Edit Limit Line
Sweep Setup > Edit Segment Table
Macro Setup > Echo Window
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.TABLE.TYPE
:DISP:UPD
Type
Command
Syntax
:DISPlay:UPDate[:IMMediate]
Description
This command executes the display update once when the display update
of the LCD screen is set to OFF (specifying False with the :DISP:ENAB).
Examples
Ana.WriteString ":DISP:UPD", True
Related Commands
:DISP:ENAB
Equivalent Softkey
No equivalent key is available on the front panel.
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.UPDATE.IMMEDIATE
:DISP:WIND<Ch>:ACT
Type
Command
Syntax
:DISPlay:WINDow<Ch>:ACTivate
Description
This command specifies the active channel. You can set only a channel
displayed to the active channel. If this object is used to set a channel not
displayed to the active channel, an error occurs when executed and the
object is ignored.
Examples
Ana.WriteString ":DISP:WIND:ACT", True
Related Commands
:DISP:WIND:SPL
To Next Page
Loading...
