Keysight E4990A - Page 461

Programming
451
Equivalent Softkey
Channel Prev, Channel Next
COM Command Syntax (Internal Control Only)
SCPI.DISPLAY.WINDOW(Ch).ACTIVATE
:DISP:WIND<Ch>:ANN:MARK:ALIG
Type
Command/Query
Syntax
:DISPlay:WINDow<Ch>:ANNotation:MARKer:ALIGn[:STATe]
{ON|OFF|1|0}
:DISPlay:WINDow<Ch>:ANNotation:MARKer:ALIGn[:STATe]?
Description
This command turns ON/OFF mode that align the marker display position
of each trace based on trace 1.
Variable
Parameter Selection Option
Description State of alignment
Data Type Boolean type (Boolean)
Range ON|OFF|1|0
Preset Value ON
Query Response
{1|0}<newline><^END>
Examples
Dim Var as Integer
Ana.WriteString ":DISP:WIND1:ANN:MARK:ALIG ON", True
Ana.WriteString ":DISP:WIND1:ANN:MARK:ALIG?", True
Var=Ana.ReadNumber
Related Commands
:DISP:WIND:TRAC:ANN:MARK:POS:X
:DISP:WIND:TRAC:ANN:MARK:POS:Y
Equivalent Softkey
Marker Fctn > Annotation Options > Align
COM Command Syntax (Internal Control Only)