Programming
561
<list OSC level on/off>: ON/OFF of the list OSC level fo
each segment
0: OFF, 1: ON
<list bias on/off>: ON/OFF of the list bias for each
segment
0: OFF, 1: ON
<list meas time o/off>: ON/OFF of the meas time setting
for each segment
0: OFF, 1: ON
<list average on/off>: ON/OFF of the average for each
segment
0: OFF, 1: ON
<segment time on/off>: ON/OFF of the segment time
setting for each segment
0: OFF, 1: ON
<delay time on/off>: ON/OFF of the delay time setting
for each segment
0: OFF, 1: ON
<segm>: Number of segments. Specify an integer
ranging 1 to 201.
<star n>: Start value/center value of the n-th segment
<stop n>: Stop value/span value of the n-th segment
<poin n>: number of measurement point of the n-th
segment.
[OSC Level type n]: OSC level type: Voltage=0,
Current=1. This is not necessary when <list OSC level
on/off>=0.
[OSC Level n]: OSC level of the n-th segment. This is not
necessary when <list OSC level on/off>=0.
[Bias type n]: DC Bias type: Voltage=0, Current=1. This
is not necessary when <list Bias on/off>=0.
[Bias Level n]: DC Bias level of the n-th segment. This is
not necessary when <list Bias on/off>=0.
[meas time n]: measurement time (1 to 5) of the n-th
To Next Page
Loading...
