Keysight N9912-90001 User’s Guide 18- 13
System Settings
System Configuration
How to make GPS settings
—Press System 7.
—Then System Configuration
.
—Then GPS
.
— Then choose from the following:
— OFF
- Disable GPS (default setting).
— External
- Enable GPS using an external, customer-supplied, USB
dongle device. When enabled, a check is made to detect a USB GPS
device at the USB connectors. When a device is detected, a search is
made for satellites overhead. The GPS works best when outdoors and
in full of the open sky. when several satellites are found, the following
screen appears and is updated frequently:
Figure 18-1 GPS Display
— The left portion of the screen displays satellites and the corresponding
number on the adjacent Satellite Power chart.
As the bar graph count exceeds 9 bars, the “dB” text is dropped from the
number displayed on the bar. Units for C/No are dBHz.
To Next Page
Loading...
