Driving your vehicle
1245
Smart Cruise Control (SCC)
If your vehicle speed is between 0~
20 mph (0~ 30 km/h) when you
press the Driving Assist 「 」 but
-
ton, the Smart Cruise Control speed
will be set to 20 mph (30 km/h).
Setting vehicle to vehicle distance
Each time the button is pressed, the
vehicle to vehicle distance changes
as follows:
䳜 If you drive at 56 mph (90 km/h),
the distance is maintained as fol
-
lows:
Distance 4 - approximately 172
ft. (52.5 m)
Distance 3 - approximately 130
ft. (40 m)
Distance 2 - approximately 106
ft. (32.5 m)
Distance 1 - approximately 82 ft.
(25 m)
䳜 The distance is set to the last set
distance when the engine is
restarted, or when the system
was temporarily canceled.
Increasing the speed
䳜 Push the + switch up and release
it immediately. The cruising speed
will increase by 1 mph (1 km/h)
each time the switch is operated
in this manner.
䳜 Push the + switch up and hold it
while monitoring the set speed on
the cluster. The cruising speed will
increase by 5 mph (10 km/h) each
time the switch is operated in this
manner. Release the switch when
the desired speed is shown, and
the vehicle will accelerate to that
speed. You can set the speed to
110 mph (180 km/h).
To Next Page
Loading...
