125
5
5
Driving your vehicle Smart Cruise Control (SCC)
Check the driving condition before
using the + switch. Driving speed
may sharply increase when you
push up and hold the + switch.
Decreasing the speed
䳜 Push the - switch down and
release it immediately. The cruis
-
ing speed will decrease by 1 mph
(1 km/h) each time the switch is
operated in this manner.
䳜 Push the - switch down and hold
it while monitoring the set speed
on the cluster. The cruising speed
will decrease by 5 mph (10 km/h)
each time the switch is operated
in this manner.
Release the switch at the speed
you want to maintain. You can set
the speed to 20 mph (30 km/h).
Temporarily canceling the system
Press the 「 」 switch or depress
the brake pedal to temporarily can
-
cel Smart Cruise Control.
Resuming the system
To resume Smart Cruise Control
after the system was canceled,
push the +, - or 「 」 switch.
If you push the + switch up or -
switch down, vehicle speed will be
set to the current speed on the
cluster.
If you push the 「 」 switch, vehi
-
cle speed will resume to the preset
speed.
To Next Page
Loading...
