Driving your vehicle
1365
Smart Cruise Control (SCC)
䳜 Driving through a roadside with
trees or streetlights
䳜 Your vehicle is moving unstable
䳜 The adverse road conditions
cause excessive vehicle vibrations
while driving
䳜 Your vehicle height is low or high
due to heavy loads, abnormal tire
pressure, etc.
䳜 Driving through a narrow road
where trees or grass are over
-
grown
䳜 There is interference by electro
-
magnetic waves, such as driving in
an area with strong radio waves
or electrical noise
䳜 Driving on a curve
On curves, Smart Cruise Control
may not detect a vehicle in the
same lane, and may accelerate to
the set speed. Also, vehicle speed
may rapidly decrease when the
vehicle ahead is detected sud
-
denly.
Select the appropriate set speed
on curves and apply the brake
pedal or accelerator pedal accord
-
ing to the road and driving condi
-
tions ahead.
Your vehicle speed can be reduced
due to a vehicle in the adjacent
lane.
Apply the accelerator pedal and
select the appropriate set speed.
Check to be sure that the road
conditions permit safe operation
of the Smart Cruise Control.
䳜 Driving on a slope
During uphill or downhill driving,
the Smart Cruise Control may not
detect a moving vehicle in your
lane, and cause your vehicle to
accelerate to the set speed. Also,
To Next Page
Loading...
