141
5
5
Driving your vehicle Navigation-based Smart Cruise Control (NSCC)
illuminate on the cluster, and an
audible warning will sound.
'Drive carefully' warning message
will appear in the following circum
-
stances:
䳜 Navigation-based Smart Cruise
Control is not able to slow down
your vehicle to a safe speed
Highway Curve Zone Auto Slowdown
and Set Speed Auto Change function
uses the same 「 」 symbol.
Highway Curve Zone Auto Slow
-
down
䳜 Depending on the curve ahead on
the highway (or motorway), the
vehicle will decelerate, and after
passing the curve, the vehicle will
accelerate to Smart Cruise Control
set speed.
䳜 Vehicle deceleration time may dif
-
fer depending on the vehicle
speed and the degree of the curve
on the road. The higher the driv
-
ing speed, deceleration will start
faster.
Highway Set Speed Auto Change
䳜 Highway Set Speed Auto Change
function will operate when Smart
Cruise Control set speed and the
highway (or motorway) speed
limit is matched.
䳜 While Highway Set Speed Auto
Change function is operating,
when the highway (or motorway),
speed limit changes, Smart Cruise
Control set speed automatically
changes to the changed speed
limit.
䳜 If Smart Cruise Control set speed
is adjusted different from the
speed limit, Highway Set Speed
Auto Change function will be in
the standby state.
䳜 If Highway Set Speed Auto
Change function has changed to
the standby state by driving on a
road other than the highway (or
To Next Page
Loading...
