Driving your vehicle
1425
Navigation-based Smart Cruise Control (NSCC)
motorway) main road, Highway
Set Speed Auto Change function
will operate again when you drive
on the main road again without
setting the set speed.
䳜 If Highway Set Speed Auto
Change function has changed to
the standby state by depressing
the brake pedal or pressing the
CANCEL switch on the steering
wheel, press the 「 」 switch
to restart the function.
䳜 Highway Set Speed Auto Change
function does not operate on
highway interchanges or junc
-
tions.
䳜 Highway Set Speed Auto Change
function only operates based on
the speed limits of the highway
(or motorway), it does not work
with the speed cameras.
䳜 When Highway Set Speed Auto
Change function is operating, the
vehicle automatically accelerates
or decelerates when the highway
(or motorway) speed limit
changes.
䳜 If the speed limit is higher than
the speed limit of the speed cam
-
era while Set Speed Auto Change
function is operating, an audible
warning may sound.
䳜 The maximum set speed for
Highway Set Speed Auto Change
function is 90 mph (140 km/h).
䳜 If the speed limit of a new road is
not updated in the navigation,
Highway Set Speed Auto Change
function may not operate prop
-
erly.
䳜 If the speed unit is set to a unit
other than the speed unit used in
your country, Highway Set Speed
Auto Change function may not
operate properly.
Limitations of the System
Navigation-based Smart Cruise
Control may not operate normally
under the following circumstances:
䳜 The navigation is not working
properly
䳜 Speed limit and road information
in the navigation is not updated
䳜 The map information and the
actual road is different because of
real-time GPS data or map infor
-
mation error
䳜 The infotainment system is over
-
loaded by simultaneously per
-
forming functions such as route
search, video playback, voice rec
-
ognition, etc.
䳜 The navigation searches for a
route while driving
䳜 GPS signals are blocked in areas
such as a tunnel
䳜 Map information is not transmit
-
ted due to infotainment system's
abnormal operation