Kidde ARIES

August 2013 3-30 P/N 06-236530-001
3-2.5.2.3.20 How to View the Memory Status of Remote Release Modules
Purpose: To get diagnostic information concerning the memory status
of RRM modules. Contact Kidde Technical Support if RRM units are not
functioning properly.
3-2.5.2.3.21 How to List General Alarms
Purpose: To acess the General Alarm output list.
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 2 Key Enter Set-Menu branch
4 Press "Scroll" Key twice Access additional options
5 Press 9 Key Select "More Options”
6 Press 5 Key Select "Configuration"
7 Press "Scroll" Key Access additional options
8 Press 6 Key Select “RRM Memory Status”
9 Use keypad to enter single module or range of
modules Press "Enter" Key to confirm selection.
Specify the RRM modules to view
10 Press "Backspace" Key (as required) Exit Menu System
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 2 Key Enter List-Menu branch
4 Press "Scroll" Key twice Access additional options
5 Press 9 Key Select "More Options”
6 Press 3 Key Select “General Alarm”
7 Press "Backspace" Key (as required) Exit Menu System