P/N 06-236530-001 3-45 August 2013
Note: Wait for each SLC device to report a "Not-Registered" trouble
message and ensure that all these trouble messages have been
acknowledged before proceeding with the Registration
Procedure.
Execute the De-Registration Procedure before re-registering
any previously-registered addresses.
CAUTION
The Registration Procedure shall not be used to configure a system. It is
primarily a procedure to create a database of SLC devices. Owner locations are
not assigned during the Registration Procedure.
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password; Press “Enter” Key Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press 3 Key Access "SLC Devices" option
5 Press 3 Key Select "Registration"
6 Use keypad to select address or range of
addresses to register.
Press "Enter" Key to confirm selection.
Specify addresses to register
7 Wait until "Device Registration" message
disappears from the display.
Devices register or fail.
8 Exit Menu System
To Next Page
Loading...
