Kidde ARIES

P/N 06-236530-001 3-73 August 2013
3-2.5.2.4.54 How to Configure a Network Time Synch Period
Purpose: Sets how often the master panel performs a time sync with
the slave panels.
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 6 Key Select "Network" option
6 Press "Scroll" Key twice Access additional options
7 Press 7 Key Select "Log Events”
8 Press 2 Key and then press "Enter" Key to confirm
selection.
Select "Log Group Events"
9 Press "Backspace" Key (as required) Exit Menu System
10 Wait until "Initializing Configuration" message
disappears from the display.
Initialization complete
Step Action Result
1 Press 0 Key Initiate menu access
2 Enter Password Gain access to menus
3 Press 3 Key Enter Set-Menu branch
4 Press "Scroll" Key Access additional options
5 Press 6 Key Select "Network" option
6 Press "Scroll" Key twice Access additional options
7 Press 8 Key Select "Time Sync Period”
8 Enter a valid time sync period and then press
"Enter" Key to confirm selection.
Specify Time Sync Period.
9 "Change Time Sync Time Sync Updated" message
displays.
Time Sync setting complete
10 Press "Backspace" Key Exit Menu System