This lever is used to control a auxiliary
hydraulic implement installed to rear.
See the chapter 5, “How to drive” for
the details.
DOUBLE ACTING LEVER
(1) Double Acting Lever
LINKED PEDAL LEVER (OPTIONAL)
When placing the linked pedal lever
in the “ON” position, the engine rpm
is synchronized with the HST driving
pedal.
1) Depressing the HST forward/re-
verse driving pedal: Engine RPM
will be increased together.
2) Releasing the HST forward/re-
verse driving pedal: Engine RPM
will be decreased together.
(1) Linked Pedal Lever
(A) ON (B) OFF
In abnormal driving condition,
such as rapid acceleration or
deceleration, is occurred by
operating the HST pedal, not by
other functions such as the load
match, speed synchronization
and cruise control, follow the
following steps immediately.
1) Release the driving pedal.
2) Depress the brake pedal to its
end.
3) Turn the ignition switch to the
“OFF” position.
Stop the tractor by performing
the steps above.
CAUTION
To Next Page
Loading...
